Switch and Module Weights and Quantities
Switch and Module Weights and Quantities
Component
Cisco Nexus 93128TX Chassis
(N9K-C93128TX)
Uplink Module
– M6PQ and M6PQ-E
– M12PQ
Fan Modules
– Port-side exhaust (blue)
(N9K-C9300-FAN2-B)
– Port-side intake (burgundy)
(N9K-C9300-FAN2)
Power Supply Module
– 1200-W AC port-side exhaust
(burgundy) (N9K-PAC-1200W-B)
– 1200-W AC port-side intake
(blue) (N9K-PAC-1200W)
– 930-W DC port-side exhaust
(gray) (UCS-PSU-6332-DC)
– 930-W DC port-side intake
(green) (UCSC-PSU-930WDC)
Transceiver and Cable Specifications
To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Cisco Nexus 93128TX ACI-Mode Switch Hardware Installation Guide
52
Weight per Unit
32.56 lb (14.8 kg)
—
2.0 lb (0.9 kg)
3.12 lb (1.4 kg)
—
1.14 lb (0.5 kg)
1.14 lb (0.5 kg)
—
2.64 lb (1.2 kg)
2.64 lb (1.2 kg)
2.42 lb (1.1 kg)
2.42 lb (1.1 kg)
System Specifications
Quantity
1
1
3 (2 for operations and 1 for
redundancy)
2 (1 for operations and one for
redundancy)
https://www.cisco.com/
https://www.cisco.com/c/en/us/support/