Motherboard Components; Processor And Heatsink Installation; Installing The Lga 1151 Processor - Supermicro SuperServer 1019C-FHTN8 User Manual

SuperServer 1019C-FHTN8 User's Manual

3.3 Motherboard Components

Processor and Heatsink Installation

Notes:
•
Use ESD protection.
•
Unplug the AC power cord from all power supplies after shutting down the system.
•
Check that the plastic protective cover is on the CPU socket and none of the socket pins
are bent. If they are, contact your retailer.
•
When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or CPU socket, which may require manufacturer repairs.
•
Thermal grease is pre-applied on a new heatsink. No additional thermal grease is needed.
•
Refer to the Supermicro website for updates on processor support.
•
All graphics in this manual are for illustration only. Your components may look different.

Installing the LGA 1151 Processor

1. Press the load lever down to release the load plate from its locking position.
Plastic Protective
Cover
Load Lever
Load Plate
26