Transferring settings
en
sTransferring settings
T his function can be used to transfer the heat setting,
T r a n s f e r r i n g s e t t i n g s
the programmed cooking time and the selected
cooking function from one hotplate to another.
To transfer the settings, move the cookware from the
hotplate which is switched on to another hotplate.
You can find additional information on the
Note:
positioning of the cookware in the section on ~ "Flex
Zone"
Activation
Move the cookware from the hotplate which is
1.
switched on to another hotplate.
The heat setting of the original hotplate flashes.
The cookware is detected and the previously
selected heat setting and the
new hotplate display.
Select the new hotplate to confirm the settings.
2.
The heat setting of the original hotplate is set to
The settings have been transferred to the new hotplate.
Notes
Move the cookware to a hotplate which is not
■
switched on, which you have not yet preset or on
which no other cookware has been placed.
The PowerBoost or ShortBoost function can then
■
only be moved from left to right or right to left if no
hotplate is active.
If a new item of cookware is set down on another
■
hotplate before the settings have been confirmed,
this function is ready for both cooking vessels.
If several vessels are moved, the function is only
■
ready for the vessel which was last moved.
24
symbol flash in the
£
.
‹