Preparing And Maintaining The Wireless Temperature Sensor - Siemens EX8 LX3 E Series Instruction Manual

Flex induction cooktop with integrated ventilation system
Table of Contents

Advertisement

Frozen products
Function for frying with a large amount of oil
Frozen chips***
* Turn several times.
** Add liquid according to the manufacturer's instructions.
*** Heat the oil with the lid on. Fry in portions with the lid off (see table for cooking time per portion).
Miscellaneous
Function for frying with a small amount of oil
Camembert/cheese
Dried instant meals to which water is added, e.g. pasta dishes
Croutons
Almonds/hazelnuts/walnuts/pine nuts
Heating/keep-warm function
Food in jars and tins, e.g. goulash soup*
Mulled wine**
Poaching function
Milk**
* Add the food right at the beginning and stir regularly.
** Add the food right at the beginning.
Preparing and maintaining the wireless
temperature sensor
This section provides information on:
Adhering the silicone patch
Using the wireless cooking sensor
Cleaning
Changing the battery
The silicone patch and the cooking sensor can be
purchased at a later time from specialist retailers, our
technical after-sales service or our official website. To
do this, quote the relevant reference number:
00577921
Set of 5 silicone patches
HZ39050
Cooking sensor and set of 5 silicone patches
Adhering the silicone patch
The silicone patch attaches the temperature sensor to
the cookware.
When a pan is used for the first time with the cooking
functions, the silicone patch must be adhered directly to
the pan. It is important
Cooking assistance
functions
Cooking functions
Cooking assistance
Temperature
functions
setting
Frying sensor
3
Frying sensor
1
Frying sensor
3
Frying sensor
4
Cooking functions
1 / 70 ºC
Cooking functions
1 / 70 ºC
Cooking functions
2 / 90 ºC
that the adhesive area on the pan is free from
1.
grease. Clean the pan, dry it thoroughly and wipe the
adhesive area with a spirit.
Remove the protective film from the silicone patch.
2.
Adhere the silicone patch to the outside of the pan in
the correct place using the enclosed template as a
guide.
Press down all over the surface of the silicone patch,
3.
including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
Cooking assist functions
Temperature
Total cooking time
setting
from signal tone
(mins)
5 / 170 ºC
4 - 8
Total cooking time
from signal tone
(mins)
7 - 10
5 - 10
6 - 10
3 - 15
10 - 20
-
-
en
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex807lx33e/01Ex875lx34e/06Ex875lx34e/13Ex875lx34e/07

Table of Contents