Table of Contents
Advertisement
Cleaning and storing
•
Keep the handles free of grease so that you can maintain a firm grip.
•
Clean the device as required with a damp cloth and, if necessary,
mild washing up liquid.
•
If the chainsaw is not to be used for an extended period of time
then you should remove the chain oil from the tank. Briefly immerse
the chain and the cutter rail in an oil bath and then wrap them
in oil paper.
•
Ensure that the guide bar cover is in place when storing.
CAUTION!
ALWAYS DISCONNECT THE BATTERY BEFORE
CLEANING THE CHAINSAW.
CAUTION!
NEVER IMMERSE THE UNIT IN WATER OR OTHER
LIQUIDS IN ORDER TO CLEAN IT.
CAUTION!
STORE THE CHAINSAW IN A SAFE AND DRY
PLACE OUT OF THE REACH OF CHILDREN.
SPARE PARTS
Chain Replacement:
The chain can be purchased through Ozito spare parts or from your
local Bunnings Warehouse. The correct chain can be purchased by
matching the pitch, gauge and number of links as shown below:
2
9.53mm(3/8)
1.1mm(.043")
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
40 Links
DESCRIPTION OF SYMBOLS
Regulator compliance mark
Read instruction manual
Always hold the saw with both hands
Keep bystanders away. Do not saw whilst people especially children
or pets are in the area.
Beware of kickback
Blade continues to rotate after the machine is switched off. Wait until all
machine components have completely stopped before touching them.
Do not saw in the rain or leave the chainsaw outdoors while raining.
BATTERY & CHARGER SAFETY WARNINGS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING
INSTRUCTIONS FOR YOUR BATTERY CHARGER.
1. Before using the charger read all instructions and cautionary markings on the
charger, battery pack and the product using the battery pack.
2. This charger is not intended for any uses other than charging rechargeable
batteries, any other use may result in the risk of fire, electric shock or electrocution.
3. Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive internal heat. Place the charger in a position
away from any heat source.
4. To reduce risk of damage to the electric plug and cord, pull by the plug rather
than the cord when disconnecting the charger.
5. Make sure the cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
6. An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in the risk of fire, electric shock or
electrocution.
7. Do not operate the charger if it has received a sharp blow, been dropped or
otherwise damaged in any way. Have it checked by an electrician or power tool
repairer.
8. Do not disassemble charger. Take it to an electrician or power tool repairer when
service or repair is required. Incorrect reassembly may result in a risk of fire,
electric shock or electrocution.
9. To reduce risk of electric shock, unplug the charger from the outlet before
attempting any cleaning. Removing the battery pack will not reduce this risk.
10. Never attempt to connect 2 chargers together.
11. DO NOT store or use the tool and battery pack in locations where the
temperature may reach or exceed 40ºC (such as inside sheds or metal buildings
in summer).
12. The charger is designed to operate on standard household electrical power
(240 volts). Do not attempt to use it on any other voltage!
13. The battery pack is not fully charged out of the carton. First read the safety
instructions and then follow the charging notes and procedures.
14. The longest life and best performance can be obtained if the battery pack is
charged when the air temperature is between 18 - 24ºC. Do not charge the
battery pack in an air temperature below 10ºC or above 40ºC. This is important
and will prevent damage to the battery pack.
15. Do not incinerate the battery pack even if it is seriously damaged or is
completely worn out. The battery can explode in a fire.
16. Never attempt to open the battery pack for any reason. If the plastic housing
of the battery pack breaks or cracks, immediately discontinue use and do not
recharge.
17. During charging, the battery must be placed in a well ventilated area.
Wear safety gloves
Wear ear muffs & safety glasses
Decibel level
97
Advertisement
Table of Contents
