Super X11DPS-RE User's Manual
4.5 IPMI
Use this feature to configure Intelligent Platform Management Interface (IPMI) settings.
When you select this submenu and press the <Enter> key, the following information will
display:
•
IPMI Firmware Revision: This feature indicates the IPMI firmware revision used in your
system.
•
Status of BMC: This feature indicates the status of the BMC (Baseboard Management
Controller) installed in your system.
•
BMC Configured Power: This feature allows to set power control for BMC congiguration.
•
Control Policy: This feature allows to set power control. Default setting is Power off.
•
Power Control Policy: This feature provides support for power control policy. The options
are Do not Powerup, Last Power State, Power Restore and Unspecified.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are Enabled
and Disabled.
130