Supermicro X11DPS-RE User Manual page 98

Super X11DPS-RE User's Manual
Intel® VMD for Onboard NVMe

VMD Configuration Onboard NVMe
Onboard NVMe Mode
Select Legacy Mode for the onboard NVMe devices to support Legacy Mode. The options
are Legacy Mode and the VMD Mode.
Note: When this option is set to VMD Mode, the following two items will display.
P1_NVMe0 VMD/P2_NVMe1 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
root port specified by the user. The options are Enable and Disable.
Note: After you've enabled VMD support on a NMVe port, this port will be dedicated
for VMD use only. To reactivate this port for NMVe use, please disable VMD support
on the port.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
IIO-PCIE Express Global Options

IIO-PCIE Express Global Options
The section allows the user to configure the following PCIe global options:
PCE-E Hot Plug
Select Enable to support Hot-plugging for the selected PCIe slots which will allow the user
to replace the devices installed in the slots without shutting down the system. The options
are Enable and Disabled.
PCI-E Completion Timeout (Global) Disable
Use this feature to select the PCIe Completion Time-out settings. The options are Yes, No,
and Per-Port.
South Bridge
The following South Bridge information will display:
•
USB Module Version
•
USB Devices
98