Supermicro X11DPS-RE User Manual page 96

Super X11DPS-RE User's Manual
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
Intel®
VMD for CPU1 PStack1
Intel® VMD for Volume Management Device for PStack1
Select Enable to enable Intel Volume Management Device Technology support for the
stack specified by the user. The options are Disable and Enable.
Note: When this option is set to Enable, the following two items will display.
CPU1 M.2 C-2 PCI-E 3.0 x4 VMD/CPU1 M.2 C-1 PCI-E 3.0 x4 VMD/CPU1 Slot3
PCI-E 3.0 x8 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
root port specified by the user. The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
VMD Configuration for PStack2
Intel® VMD for Volume Management Device for PStack2
Select Enable to enable Intel Volume Management Device Technology support for the
stack specified by the user. The options are Disable and Enable.
Note: When this option is set to Enable, the following two items will display.
CPU1 Slot6 PCI-E 3.0 x8 VMD/CPU1 Slot7 PCI-E 3.0 x8 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
root port specified by the user. The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
Intel® VMD for CPU2

Intel®
VMD for CPU2 PStack0
Intel® VMD for Volume Management Device for PStack0
Select Enable to enable Intel Volume Management Device Technology support for the
stack specified by the user. The options are Disable and Enable.
Note: When this option is set to Enable, the following two items will display.
96