Table of Contents
Advertisement
Super X11DPS-RE User's Manual
Motherboard Features
CPU
•
Dual Intel Intel Xeon Scalable-SP or 2nd Gen Intel Xeon Scalable-SP processors (Socket P) with support of 3 Intel
UltraPath Interconnects (UPIs) links of up to 10.4 GT/s
Note: Both CPUs need to be installed for full access to the PCIe slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 18 to determine which slots or devices may be affected.
Memory
•
The X11DPS-RE supports up to 6TB of LRDIMM/RDIMM/NVDIMM DDR4 ECC 2933*/2666/2400/2133 MHz memory in
24 memory slots. (*Notes: 1. 2933 MHz memory is supported by the 82xx/62xx series processors only. 2. Up to 9TB
memory is supported with DCPMM modules installed.)
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C627
Expansion Slots
•
2 PCIe 3.0 x32 Tray cable connector interface
•
2 PCIe 3.0 x16 slots with riser card support
Network
•
Dual RJ45 10G LAN ports
BaseBoard Management Controller (BMC)
•
ASPEED AST 2500 Baseboard Management Controller (BMC) supports IPMI 2.0
•
One (1) dedicated IPMI_LAN located on the rear IO backpanel
Graphics
•
Graphics controller via ASPEED AST2500
I/O Devices
•
Serial (COM) Port
•
SATA 3.0
Note: The table above is continued on the next page.
Motherboard Features
•
Two (2) serial-port header
•
Total of 4 SATA 3 ports:
•
Two (2) SATA DOM connectors (S-SATA4, S-SATA5)
•
Two (2) PCIe/SATA Hybrid M.2 connections
14
Advertisement
Table of Contents
