Supermicro X11DPS-RE User Manual page 12

Super X11DPS-RE User's Manual
Quick Reference Table
Jumper Description
JBT1 CMOS Clear
JP1 BIOS Advance Function
JP5 BMC Power Button Ready Test Header
JPB1 BMC Enable/Disable
JPL1 GLAN Enable/Disable
JPME1 ME Recovery
JPME2 Manufacturing Mode
JPQAT QAT (QuickAssist Technology) Enable/Disable
JWD1 Watch Dog Timer Enable
LED Description
LE1 CPLD Heartbeat LED
LE2 Onboard Power LED
LED1 UID LED
LED3 PCIe/SATA Hybrid M.2 SLOT 1 LED
LED4 PCIe/SATA Hybrid M.2 SLOT 2 LED
LEDM1 BMC Heartbeat LED
Connector Description
BT1 Onboard CMOS battery
FAN1 ~ FAN8 System/CPU fan headers (FAN1: CPU Fan)
J30 PCIe/SATA Hybrid M.2 Slot 1
J31 PCIe/SATA Hybrid M.2 Slot 2
JCOM1/JCOM2 COM ports
JF1 Front control panel header
JIPMB1 4-pin external I²C header (for an IPMI card)
JIPMILAN IPMI-Dedicated LAN port
Chassis intrusion header (Note: Please connect a cable from the Chassis Intrusion header at JL1
JL1
to the chassis to receive an alert via IPMI.)
JLAN1/JLAN2 10G LAN ports 1 and 2
JPWR1/JPWR2 Backplane power connectors
JRK1 Intel VROC RAID key header for NVMe Solid State Devices (SSD)
JSD1 - JSD2 SATA Disk-On-Module (DOM) power connectors
JTPM1 TPM/PORT80 Port 80 connector for Trusted Platform Module (TPM)
JUIDB2 Unit Identifier (UID) switch
JUSB1 (3.0) USB 3.0 rear ports (USB12/13)
Default Setting
Open (Normal)
Pins 2-3 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
Status
Blinking Green: Normal
Solid Green: Power on
Solid Blue: Unit Identified
Blinking Green: M.2 Active
Blinking Green: M.2 Active
Blinking Green: Normal
12