Epson ET-16500 User Manual page 156

User's Guide
Wi-Fi/Network Status
Displays or prints the network settings and connection status.
Wi-Fi Setup
❏ Wi-Fi Setup Wizard
Select an SSID, enter a password, and then connect the printer to a wireless (Wi-Fi) network.
❏ Push Button Setup (WPS)
Connect the printer to a wireless network by pressing the WPS button on your wireless router.
❏ PIN Code Setup (WPS)
In the wireless router utility, enter the PIN code displayed on the printer's screen to connect the
printer to a wireless (Wi-Fi) network.
❏ Wi-Fi Auto Connect
Connects the printer to a wireless (Wi-Fi) network using a computer that is connected to the access
point. Insert the software disc supplied with the printer into the computer, and then follow the on-
screen instructions. When you are prompted to operate the printer, run this menu.
❏ Disable Wi-Fi
Disables the connection by turning off the wireless signal without deleting the network information.
To enable the connection, set up the wireless (Wi-Fi) network again.
❏ Wi-Fi Direct Setup
Connects the printer to a wireless (Wi-Fi) network without a wireless router.
Connection Check
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the report to solve the problem.
Advanced Setup
Make the following detailed settings.
❏ Printer Name
❏ TCP/IP Address
❏ DNS Server
❏ Proxy Server
❏ Email Server
❏ IPv6 Address
❏ Wi-Fi Direct
❏ MS Network Sharing
Related Information
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 27
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 28
&
"Disabling Wi-Fi from the Control Panel" on page 41
&
"Making Wi-Fi Direct Settings" on page 28
&
"Messages and Solutions on the Network Connection Report" on page 34
&
"Making Advanced Network Settings from the Control Panel" on page 30
&
Menu Options for Setup Mode
156