Lights And Printer Status - Epson ET2710 Series User Manual

User's Guide
+
+

Lights and Printer Status

Lights on the control panel indicates the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
Error Status
When an error occurs, the light turns on or flashes. Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Light Status
Wi-Fi connection error has occurred.
Initial ink charging may not be complete.
No paper is loaded or more than one sheet
has been fed at a time.
Printer Basics
Restore Default Network Settings
Turn the printer on while holding down the
settings. When the network settings are restored, the printer turns on and the network status
lights flash alternately.
Print Nozzle Check Pattern
Turn the printer on while holding down the
button to restore the default network
y
button to print the nozzle check pattern.
Solutions
Press the button to clear the error and try again.
See the Start Here poster to complete initial ink
charging.
Load paper and press the
16
or button.