Checking Lights And Printer Status - Epson ET-1810 Series User Manual

Guide to the Control Panel

Checking Lights and Printer Status

Lights on the control panel indicates the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
Error Status
When an error occurs, the light turns on or flashes. Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Light Status
Wi-Fi connection error has occurred.
Initial ink charging may not be complete.
No paper is loaded or more than one sheet
has been fed at a time.
A paper jam has occurred.
>
Checking Lights and Printer Status
18
Solutions
Press the button to clear the error and try again.
See the Start Here poster to complete initial ink
charging.
Load paper and press the
Remove the paper and press the
If the paper jam error continues after removing the
paper and turning the power off and on again, paper
may remain inside the printer. Load A4 size paper in
the rear paper feed, and then press the
remove the paper inside. Load paper in the portrait
direction.
If the error cannot be cleared, contact Epson support.
button.
button.
button to