Changing The Connection Method To A Computer; Restoring The Network Settings From The Control Panel - Epson ET2710 Series User Manual

User's Guide
Related Information
"Changing the Connection Method to a Computer" on page 32
&

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the software disc (only for the models that come with a software disc and users with Windows
computers with disc drives.)
Insert the software disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Change or re-set the connection method on the Select Software Installation screen, and then click Next.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Turn the printer off.
Network Settings
32