Checking Lights And Printer Status - Epson ET-2830 Series User Manual

Guide to the Control Panel
+
+
Related Information
"Checking and Changing the Paper Size and Type Presets Using Web Config" on page 27
&

Checking Lights and Printer Status

Lights on the control panel indicates the status of the printer.
Normal Status
: On
Light Status
The printer is connected to a wireless (Wi-Fi) network.
The printer is connected to a network in Wi-Fi Direct (Simple AP) mode.
The printer is set to print on the paper indicated by the light. This setting is only used when printing
with AirPrint or Mopria, so you can ignore the light when you print using other methods. For more
details, see the explanation of the
Error Status
When an error occurs, the light turns on or flashes. Details of the error are displayed on the computer screen.
/ : On
/ : Flashing
Light Status
Wi-Fi connection error has occurred.
Initial ink charging may not be complete.
>
Checking Lights and Printer Status
Restore Default Network Settings
Turn the printer on while holding down the
settings.When the network settings are restored, the network status lights flash alternately and
then turn off.
Print Nozzle Check Pattern
Turn the printer on while holding down the
button to restore the default network
y
button to print the nozzle check pattern.
button.
Solutions
Press the button to clear the error and try again.
See the Start Here poster to complete initial ink
charging.
22