Loading Paper In The Rear Paper Feed - Epson ET2710 Series User Manual

User's Guide
❏ If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled
paper may cause paper jams and smears on the printout.
❏ Do not use paper that is wavy, torn, cut, folded, damp, too thick, too thin, or paper that has stickers stuck to it.
Using these types of paper causes paper jams and smears on the printout.
❏ Make sure you are using long-grain paper. If you are not sure what type of paper you are using, check the paper
packaging or contact the manufacturer to confirm the paper specifications.
Related Information
"Printer Specifications" on page 133
&

Loading Paper in the Rear Paper Feed

1. Open the feeder guard and pull out the paper support.
2. Slide the edge guides.
Preparing the Printer
36