Menu Screen Items - Icom IC-M423G Instruction Manual

■ Menu screen items

The Menu screen contains the following items.
D DSC Calls
Item Ref.
• Individual Call p. 32
• Individual ACK* 1 p. 34
• Group Call p. 36
• All Ships Call p. 38
• Distress Call p. 26
5
• Distress Relay ACK* p. 30
• Received Call Log p. 63
D DSC Settings
Item Ref.
3
• Position Input* p. 25
• Individual ID p. 22
• Group ID p. 23
• Individual ACK p. 65
• Position ACK p. 65
* 1 Displayed only after receiving a corresponding call.
* 2 For only USA and Australian version transceivers.
* 3 Displayed only when no GPS information is received.
* 4 Displayed only when the optional HM-195 is connected.
* 5 For only USA version transceivers.
* 6 This setting may not be usable, depending on the transceiver ver-
sion or presetting.
Item Ref.
• Transmitted Call Log p. 62
• Position Request* 2 p. 39
• Position Report* 2 p. 41
• Polling Request* 2 p. 43
• Test Call p. 45
1
• Test ACK* p. 47
Item Ref.
• Test ACK p. 65
• CH 16 Switch p. 66
• Alarm p. 67
• CH 70 SQL Level p. 67
• DSC Loop Test p. 68
MENU SCREEN OPERATION
D Radio Settings
Item Ref.
• Scan Type p. 76
• Scan Timer p. 76
• Dual/Tri-Watch p. 76
• CHAN Group p. 76
D Configuration
Item Ref.
• Backlight p. 78
• Display Contrast p. 78
• Key Beep p. 78
• Key Assignment p. 78
• UTC Offset p. 80
D MMSI/GPS Info
The transceiver shows the preset MMSI and ATIS*
8
and GPS information* .
If the code is not entered, "NO DSC MMSI" or "NO ATIS
7
MMSI"* is displayed.
* 7 Displayed only for the Dutch and German version transceivers.
* 8 Displayed only when an external or the built-in GPS receiver is
receiving valid position data.
9
Item Ref.
• WX Alert* 2 p. 77
• RT Indicator* 5 p. 77
* p. 77
• CH Display 6
Item Ref.
• Noise Cancel p. 80
• Inactivity Timer p. 81
• NMEA Output p. 82
• Remote ID p. 83
• COMMANDMIC SP* 4 p. 83
7 codes
Rotate
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
75