Recording And Playback; Midi Function; What's Midi; Midi Connection - Medeli MK200 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

You can record you performance and then play it back.

Press the [RECORD] button, the RECORD

indicator will be lit, and the beats will flash.

Play the keyboard or press the [START/STOP] button to start

recording. If you want to record the accompaniment, please turn on

the CHORD mode, then play chords in the chord section of the

keyboard.

Press the [RECORD] button again to stop recording. The RECORD

indicator goes out.

Press and hold the [PLAY] button for 2 seconds to play back the

recording. The PLAY indicator will be lit.

Press and hold the [PLAY] button for 2 seconds again to stop

playback. The PLAY indicator goes out.

During recording, if you press the [PLAY] button, it will stop recording

and play back the notes you have recorded.

Note:

The recording data will be lost after power off.

By using the MIDI functions you can expand your musical possibilities.

This section explains what MIDI is, and what it can do, as well as how

you can use MIDI on your instrument.

What's MIDI?

MIDI (short for Musical Instrument Digital Interface) allows a wide variety

of electronic musical instruments, computers and other related devices

to connect and communicate with one another. MIDI carries event

messages that specify notation, pitch and velocity, control signals for

parameters such as volume, vibrato, audio panning, and program

change information to change the sound selections.

The instrument can output the real-time playback information via MIDI

and control external MIDI devices. The instrument can also accept

incoming MIDI messages and generate sound accordingly.

MIDI Connection

The instrument is equipped with a standard USB interface, which allows

the instrument to be connected to a computer. Most computers will

automatically recognize the instrument, and allow MIDI messages to be

transmitted between the instrument and the computer via the USB-MIDI

jack.

Use a standard USB cable to connect the USB jack of the instrument to

the USB port of a computer.

Note:

Activate the computer from a sleep/suspended/standby mode before

connecting the USB cable.

Connect the USB cable to the instrument and a computer before

turning the power of the instrument on.