Table of Contents
Advertisement
Record
Choosing Tracks
2.
The track cursor on the left side of the LCD has 3 status
When the cursor is flashing, it indicates the flashing track is the track to be recorded.
When the cursor is lightened, it indicates there
The data in
this track will be played while recording for another track.
When the cursor is darkened, it indicates there's no data in this track or there's data in this track but it's
forbid to play while recording
Press "Accomp" (or "Melody 1" to "Melody 5") to
select the desired track. The corresponding track
will be switched
from
pressing the track button repeatedly
2 melody tracks can't be recorded at the same time.
However,you are allowed to record 1 melody track
and 1 accomp track simultaneously.
Style can only be recorded in "Accomp"
Stop Recording
3.
When the capacity is full, the recording will be stopped
automatically when recording is in process.
Press
[RECORD]
button again while recording to stop
this action immediately.
Playback Recording Song
Press
[PLAY/STOP]
button to enter the user song
1.
selected mode. LCD d
user's song and Play _ Song
"
Press
[+/YES] [-/NO]
/
2.
want to play.
34
another track
the above three states
.
track
isplays
the sequence number of
".
button to select the user song you
:
Lighten, Flashing, Darken.
has
recorded
data
in this track .
.
by
.
Flash
Advertisement
Table of Contents
