4. Alignment and Troubleshooting
7) Uneven Density
Description : Print density is uneven between left and right.
Check and cause
The pressure force on the left and right springs of the
•
transfer roller is not even.
The springs are damaged.
•
The transfer roller is improperly installed.
•
The toner level is not even on the laser toner cartridge or
imaging unit due to the bad blade.
8) Background
Description : Light dark background appears in whole area of the printing.
Check and cause
Does recycle paper be used?
The life of the imaging unit has been expired
The output from the HVPS is abnormal.
4-51
Solution
1) Remove the transfer roller Assy.
2) Check if the transfer roller Assy has any wrong part.
3) Replace the transfer roller Assy.
Replace the laser toner cartridge or imaging unit.
Solution
Use the proper papers.
Replace the laser toner cartridge or imaging unit.
Replace the HVPS board.
Copyright© 1995-2013 SAMSUNG. All rights reserved.