(1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. C7-SUB Manual (3.0E) Safety instructions C7-SUB Manual (3.0E)
Page 4
Connections The C7-SUB cabinet is fitted with a pair of EP5 connectors. All pins n.c. of both connectors are wired in parallel. The C7-SUB uses the pin assignments 3/4 and 5 (Pin 5: SenseDrive - D12 only and in conjunction with 5-wire cables).
Page 5
Selecting C7-SUB mode in the E-PAC enables one C7-SUB cabinet to be driven at an output power of 300 Watts. We do not recommend that two C7-SUB cabinets are driven in LO IMP mode as the 6 dB reduction in input level to the loudspeakers results in no gain in acoustical output.
Pin assignments ............3/4 and 5 (Pin 5: SenseDrive - D12) optional.........................2 x NL4 Pin assignments ......................2+ / 2– Weight .......................49 kg (108 lb) C7-SUB frequency response, standard and 100 Hz settings C7-SUB cabinet dimensions in mm [inch] C7-SUB Manual (3.0E)
EU conformity of loudspeakers This declaration applies to loudspeakers manufactured by d&b audiotechnik AG and includes the types listed in the table below: − C7-SUB Z2259 All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.