Southbend G Series Owner's Manual page 14

I
NSTALLATION
8. Insert two bolts (items "A" in the following diagram) up through the top of the lower oven and screw them into the
threaded holes in the bottom of the top oven. Tighten these bolts and the screws that you did not tightened in
the previous step.
9. Replace the right side insulation, exterior panel, and lower front panel that you removed in steps 4, 5, and
6 of this procedure.
PAGE 14 OF 48
OPERATOR'S MANUAL 1181958 REV 6 (11/15)
E C
LECTRIC ONVECTION
O
VENS