Table of Contents
Advertisement
Super X11SAA/A2SAV/-V/-2C-L/-2C-LV/-L/-LV User's Manual
4.7 RAID Level Settings
Follow the instructions below to set the RAID level for a hard disk drive. Commands are in
italics.
Preparation
1. A FAT32 USB Drive.
2. Download "ui64.efi" from the Supermicro website and then copy it to the USB drive.
3. After booting up the system, press F11 to show the boot menu and select the first choice.
This will take you to the EFI shell.
86
Advertisement
Table of Contents
