Quick Reference Table - Supermicro X11SAA User Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JI C1/JI C2 SMB to PCI-E Slots Enable/Disable
2 2
JPAC1 Audio Enable
JPL1 LAN1 Enable/Disable
JPL2 LAN2 Enable/Disable
JPME2 Maufacturing Mode
JWD1 Watch Dog
LED Description
LED1 Power LED S3 Blink Function
LED2 System Power LED
LED3 P5V_STBY Power LED
Connector Description
AUDIO FP Front Panel Audio Header (not available on -L/-LV)
BT1 Onboard Battery
COM Ports supported by Novuton 5523D
COM1 ~ COM3
(COM1 in RJ45, COM1/2 support RS-232, COM3 supports RS-485)
EDP1 Embedded DisplayPort (see Note 1 on page 12) (A2SAV/-2C-L/-L only)
FAN1/FAN2 System/CPU Fan Headers (FAN1: CPU Fan)
HDMI/DP High Definition Multimedia Interface/DisplayPort
I-SATA0/I-SATA1 Intel® SATA 3.0 Ports
JD1 Speaker Header
JF1 Front Control Panel Header
JGP1 General Purpose I/O Header
JL1 Chassis Intrusion Header
JMD1 M.2 PCI-E 2.0 X2 Slot / I-SATA0 Slot
JMP1 Mini-PCIe with mSATA / I-SATA1 (not available on -L/-LV)
4-pin Power Connector for HDD devices (provides power from the motherboard to system HDD
JPH1
devices)
JPW1 24-pin ATX Power Connector
JPV1 12V 4-pin Power Connector
JSD1 SATA DOM Power Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1/LAN2 LAN (RJ45) Ports
M2_SRW2/M2_SRW3 M.2 Mounting Screws
mSATA/m-PCIE mSATA/miniPCIE Slot (not available on -L/-LV)
M-SATA0 ~ M-SATA3 SATA Ports supported by Marvel 88SE9230 (not available on -L/-LV)
Note: Table is continued on the next page.
Default Setting
Open: Normal, Short: Clear CMOS
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Blinking Green: S3 function
Solid Blue: Power On
5V Standby Power Ready
11
Chapter 1: Introduction