Motherboard Features - Supermicro X11SAA User Manual

Motherboard Features

CPU
•
X11SAA supports Intel® Pentium N4200 Quad Core SoC
•
A2SAV/-V/A2SAV-L/-LV supports Intel Atom E3940 Quad Core SoC
•
A2SAV-2C-L/-2C-LV supports Intel Atom E3930 Dual Core SoC
Memory
•
Integrated memory controller supports up to 8 GB of DDR3L Non-ECC SO-DIMM memory at 1867 MHz.
DIMM Size
•
8GB at 1.35V
Expansion Slots
•
One (1) PCI Express 2.0 x2 (IN X8) (Slot 1)
•
One (1) M.2 Slot (PCI-E 2.0 x2 slot / I-SATA0)
•
One (1) mSATA/mini PCIE Slot (Mux with I-SATA1) (not available on the -L/-LV)
Network
•
Intel® i210 Gigabit Ethernet Controller
Graphics
•
Intel HD Graphics 505 for X11SAA and 500 for A2SAV/-V/-L/-LV
I/O Devices
•
Serial Port/Header
•
SATA 3.0
Peripheral Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB2/3)
•
Three (3) USB 2.0 headers for front access (USB5, USB6/7, USB8/9) ((USB5 and USB6/7 not available on -L/-LV)
•
One (1) USB Type A connector for front access (USB4) (not available on the -L/-LV)
Note: The table above is continued on the next page.
Motherboard Features
•
One (1) Fast UART 16550 port on the I/O back panel in RJ45 connector
•
Two (2) serial headers
•
Two (2) I-SATA 3.0 ports (I-SATA0-1)
•
Four (4) M-SATA 3.0 ports (M-SATA0-3) (Supports RAID 0, 1, 10)
(M-SATA ports are not available on -L/-LV)
13
Chapter 1: Introduction