Scarlett SC-HB42F71 Instruction Manual page 5

Do not use other attachments than those supplied.

In case of power cord is damaged, its replacement should be

done by the manufacture or service department or the other
high-skill person to avoid any danger.
Keep the cord away from sharp edges and hot surfaces.

Do not pull, twist, or wrap the power cord around the appliance.

When you have finished, before extracting the products and tips,

unplug the appliance and wait until the motor.
WARNING:The blades are extremely sharp and therefore

dangerous. Handle with caution!
WARNING: It is prohibited to overfill the unit or use it without

ingredients. Do not exceed the continuous operating time.
Never place hot ingredients into the bowl(> 70 ºC).


Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning
appliance in the nearest service center.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at

room temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without
prior notice, unless such changes influence significantly the product safety, performance, and
functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of production.
PREPARATION FOR OPERATING

Prior to initial use wash all removable parts with warm water with cleansing agent and dry up
carefully. Wipe the outside of the motor base with moist tissue.

It is strongly prohibited to immerse the motor base into any liquids and/or to clean it with
water.
IMMERSION BLENDER

This unit is ideal for making cream soups, sauces and dressings, baby food, and also for
blending various cocktails.

Place the immersion blender on the motor base.

To prevent splashing, immerse the blender into products to be blended prior to switching
it.
CHOPPING BLADE / MINI-CHOPPER

Mini-chopper is ideal for chopping greenery and vegetables, cheese, majority of nuts, dried fruits.
Hard products, such as meat, onion, carrots, need to be cut before processing. Nutshells must
be removed, meat must be separated from bones and tendons.

The chopper is not suitable for crushing ice and chopping hard products, such as coffee grains,
nutmegs, cereals.

Caution! The chopping blade is very sharp! Hold the blade by the top plastic area only!

Place the blade on the central finger in the jar.

Add ingredients into the jar.

Cover the jar with the drive.

Place the motor base into the jar drive until tightened.
While chopping, hold the motor base with one hand, accessory jar – with the other hand.


When finished, remove the motor base first.

Then remove the jar drive.

Remove the blade carefully.

At this point you may remove chopped ingredients from the jar.
www.scarlett.ru 5
IM021
SC-HB42F71