Knowledge & Resources; Safety; Store And Retain This Manual; Important Safety Information - Weldclass Weldforce 136S Operating Instructions Manual

Table of Contents

12 KNOWLEDGE & RESOURCES

Please refer to Weldclass website

Retain this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance

and cleaning procedures. Write the product's serial number into the NOTES section at the rear, and keep

this manual and the receipt in a safe and dry place for future reference.

Failure to follow the warnings and instructions may result in electric shock, fire, serious injury and/ or death.

Save all warnings and instructions for future reference.

This is the safety alert symbol to alert you to potential personal injury hazards:

Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER! indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING! indicates a hazardous situation which, if not avoided, could result in death or serious

injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTE, used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices not related to personal injury.

1. Maintain labels and nameplates on the welder. These carry important information. If

unreadable or missing, contact Weldclass for a replacement.

2. Avoid unintentional starting. Make sure the welder is setup correctly and you are prepared to

begin work before turning on the welder.

3. Unplug before performing maintenance. Always unplug the welder from its electrical outlet

before performing any inspection, maintenance, or cleaning procedures.

www.weldclass.com.au

for more information.

Table of Contents

Weldforce 181s