Battery Charging And Best Practices - Code CR7000 Series User Manual

Battery Charging and Best Practices

It is recommended to fully charge each new
battery before the first use even though a new
battery may have residual power upon
receiving.
Battery Charging
Place the B718 battery into the charging
station.
The battery can also be charged within the
CR7018 case via Code's micro-USB cable
(CRA-C34). The case will charge faster if the
USB cable is plugged into Code's USB wall
adapter (CRA-P4). Ensure the USB adapter is
securely fit into an electrical outlet. It will take
approximately 3 hours to fully charge using
this method.
The battery fuel gauge LEDs will light up, indicating the battery's state of charge. The table
below presents the charge definition per LED. The LEDs will turn off after approximately 15
minutes once the battery is fully charged.
Micro-USB Charging Port
1% - 10% charge
>10% - 19% charge
>19% - 39% charge
>39% - 69% charge
>69% - 99% charge
12