Commissioning; User Profile - Daikin Altherma 3 R F ERGA04EAV3 Installer's Reference Manual

Export MMI settings

10.6.10 Commissioning

10.6.11 User profile

ERGA04~08EA + EHVZ04+08S18+23EA
Daikin Altherma 3 R F
4P629093-1A – 2021.11
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code
[9.N] N/A
To export MMI settings
1 Open the user interface panel and insert a USB memory stick.
2 On the user interface, go to [9.N] Export MMI settings.
3 Select OK.
4 Remove the USB memory stick and close the user interface
panel.
Overview
The following items are listed in the submenu:
A
Information
Installer settings

Commissioning

User profile

Operation
About commissioning
See: "11 Commissioning" [
[B] User profile: See
Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
[A] Commissioning
[A.1] Operation test run
[A.2] Actuator test run
[A.3] Air purge
[A.4] UFH screed dryout
4
211]
"To change the user permission
10 Configuration
|
Description
4
level" [ 123].
Installer reference guide
—
—
205