Table of Contents
Advertisement
The DX-1 interacts with the operator through the membrane keypad
and the LCD display. The functions of the various keys on the keypad are
detailed below, followed by an explanation of the display and its various
symbols.
This key is used to turn the DX-1 on and off. When the gauge is turned
ON, it will first perform a brief display test by illuminating all of the
segments in the display. After one second, the gauge will display the
internal software version number. After displaying the version number, the
display will show "0.000" (or "0.00" if using metric units), indicating the
gauge is ready for use.
When the DX-1 is turned OFF the gauge has a special memory that
retains all of its settings even when the batteries are removed. The gauge
also features an auto-powerdown mode designed to conserve battery life.
If the gauge is idle for 5 minutes, it will turn itself off.
OPERATION
The Keypad
DX-1 Ultrasonic Micrometer
3
Advertisement
Table of Contents
