Table of Contents
Advertisement
12P Hex IP
Unit Temperature - With this function you can switch the temperature setting between celsius or
fahrenheit.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Temp" is displayed and press ENTER.
3. Use the UP and DOWN buttons to switch between "Fahren" and "Celsius".
4. Once you have found your desired setting press ENTER.
White Balance Settings - With this function you can adjust RGBWA & UV colors to balance the
white color.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Settings WhiteBal" is displayed and press ENTER.
3. Use the UP and DOWN buttons to switch between the colors. When you have found the color
you wish to adjust press ENTER. Use the UP or DOWN button to adjust the color values.
4. Once you have made your desired adjustment press ENTER.
Frequency Setting - With this function you can adjust the dimming frequency.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Fre_hz" is displayed and press ENTER.
3. Use the UP and DOWN buttons to scroll through different frequencies.
4. Once you have found your desired frequency press ENTER.
Gamma Brightness Setting - With this function you can adjust the gamma brightness.
Note: Removed from software version <V1.07.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Gamma" is displayed and press ENTER.
3. Use the UP and DOWN buttons to scroll through different settings.
4. Once you have found your desired setting press ENTER.
Dimmer Curve Setting:
Note: Added with software version >V1.07.
1. Access the main menu, and press the UP or DOWN buttons so that "Menu Function" is highlighted,
then press ENTER. Press the UP or DOWN buttons so that "Dim Mode" is highlighted.
2. There are 4 dimmer curve settings to choose from. Please see the Dimmer Curve Chart on page 22.
ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 19
Operating Instructions
Advertisement
Table of Contents
