Table of Contents
Advertisement
12P Hex IP
Static Color Mode:
1. Access the main menu, and press the UP or DOWN buttons so that "Menu Function" is highlighted,
then press ENTER. Use the UP or DOWN buttons to highlight "1. STATC CL:X" and press
ENTER. "X" is the current color that is displayed.
2. Press ENTER to access 1 of 3 internal programs: 6 Color Change Mode, 30 Color Change Mode,
or Color Fade Mode. Use the UP and DOWN buttons to scroll through the programs. Press
ENTER to make your selection. After making your selection you are able to adjust running speed.
Use the UP or DOWN buttons to adjust the running speed, and press ENTER.
3. You are now able to adjust the strobe rate using the UP or DOWN buttons. Press ENTER after
you have made your desired adjustment.
4. If you would like to run a static color, press the UP or DOWN buttons until "1. STATC CL" is
displayed again and press ENTER. Use the UP or DOWN buttons to scroll through the static colors.
5. Press ENTER again to enter the strobe function. Use the UP and DOWN buttons to adjust the
strobe rate. Press ENTER after you have found your desired strobe rate.
Color Macro Mode:
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "Macros" is displayed and press ENTER.
3. There are 64 colors to choose from. Find your desired color using the UP and DOWN buttons.
4. Once you have found your desired color press ENTER.
LCD Display Settings:
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "LCD.Set" is displayed and press ENTER.
3. Use the UP and DOWN buttons to make adjustments, and press ENTER to move on to the next
setting.
• "Backlight" - This lets you set how long the backlight display will stay on.
• "Key Lock" - This lets you control the key lock feature.
"ON" - Press the MODE button for 10 seconds to unlock the keypad.
"OFF" - The keypad is unlocked, simply press the MODE button to activate the keypad.
"ON1" - This setting is used to prevent the accidental unlocking of the keypad. To unlock the
keypad you will have to enter a passcode. Press the MODE button and the display will show
"LOCKED *****". To unlock the keypad press UP, DOWN, UP, DOWN, & ENTER in that order.
Every press of these buttons will delete an asterisk.
Default Running Mode:
This is a default running mode. When this mode is activated all modes will return to their default settings.
1. Plug the fixture in and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "DFSET" displayed, and press ENTER.
3. Use the UP or DOWN button to toggle between "ON' and "OFF", press ENTER to make your
selection. Press the MODE button to make no selection and exit.
ADJ Products, LLC - www.adj.com - 12P Hex IP User Manual Page 18
Operating Instructions
Advertisement
Table of Contents
