Periodic Cleaning; Cleaning The Exterior; Cleaning The Interior - Epson Disc Producer PP-100NII User Manual

Periodic cleaning

Roughly once a month, turn the product off and perform the cleaning described below.

Cleaning the exterior

1 Turn the product off.
2 When the power LED is off, unplug the power plug from the outlet.
Use a soft cloth to wipe off the dust and dirt.
3
When the exterior is very dirty, soak a soft cloth in water with a small amount of mild detergent, wring it out,
and then wipe off the dirt. Finally, wipe off the moisture using a soft, dry cloth.
• Wipe with the cover closed so that moisture does not enter the inside of the product. If the
inside becomes wet, there is a risk that the electrical circuits will short out.
• Do not use benzine, paint thinner, alcohol, or other volatile chemicals. There is a risk that the
inside or outside of the product may change properties or shape.
• Do not use a stiff brush. There is a risk of scratching the exterior of the product.
Plug the power plug into the outlet, and turn the power on.
4

Cleaning the interior

If dirt or dust collects in the inside of this product or the stackers, or if dirt adheres to it, use a soft cloth to wipe off
the dirt.
Ink may sometimes stain stackers. Remove the stains by soaking a soft cloth in water or mild detergent, wringing it
out, and then wiping them off.
Maintenance
166