Epson Disc Producer PP-100NII User Manual page 87

Setting the range outside of the recommended print area (inside diameter of 45.0 mm or
more and outside diameter within 116.0 mm) and printing may result in the discs or tray
becoming dirty, peeling off or blurring of the print, or discs sticking together. Check the label
print range of the discs you are using before configuring the setting. See "Printable area" on
page 83 in this guide for details on the recommended print area.
4 Click [OK].
The new user defined label size is registered in [Name of Custom Label Size] of the [Main] screen.
When printing with software other than EPSON Total Disc Maker, use the following settings to
create print data.
• Paper size: 124 x 124 mm
• Margins on all sides: 2 mm
Changing and deleting label sizes
This section describes how to change and delete registered user defined label sizes.
Display the setting screen of the printer driver.
1
See "Displaying from EPSON Total Disc Setup" on page 65 or "Displaying from the [Start] menu" on page 66
in this guide for the display procedure.
Publishing Discs
87