Part Names And Functions - Epson Disc Producer PP-100NII User Manual

Part Names and Functions

Front
1
2
3
4
Back
1
2
3
4
1 Control panel
Use to control this product (PP-100NII). It also
shows the status of the product and menus.
See "Control panel" on page 15 in this guide for
details on the control panel.
5
2 Ink cartridge cover
Open to insert and replace ink cartridges.
3 Disc cover lock
Use the disc cover key to lock and unlock the disc
cover (when the security lock switch is on).
4 Power button
Use to turn the product on and off.
5 Disc cover
Open when loading or taking out discs.
1 Ethernet interface connector
Plug the Ethernet cable into this connector.
2 AC inlet
5
Plug the power cord into this connector.
3 Rear printer cover
Open this cover only when a disc is stuck in the
printer tray.
4 Security slot
Allows you to attach a commercially available
antitheft wire.
5 Air vents
Expel heat generated inside this product to
prevent the temperature from rising. Leave at least
10 cm between the back of the product and the
wall for ventilation.
Part Names and Functions
13