Epson Disc Producer PP-100NII User Manual page 153

Gently push in the ink cartridge until you hear a click, unlock the lock, and then slowly pull
2
it straight out.
Click
• Ink may leak from the ink supply port on the ink cartridge you pulled out.
• Once an ink cartridge is used, there may be some ink around the ink supply port, so do not
touch it.
Take the ink cartridge out of its package.
3
• For optimum printing quality, only open the clear plastic package immediately before
installing. After opening the cartridge, try to use it up within six months. If you use an ink
cartridge that has been left open for a long time, the print quality may decline.
• When you open the plastic package, be careful not to drop the ink cartridge. The ink may
leak out.
• Do not leave the ink supply port on an ink cartridge facing downward. This could stain the
desk or other surface. In addition, dirt stuck on this product may prevent it from
functioning properly.
• Do not shake the ink cartridge too hard. The ink cartridge may leak if you shake it around
too much.
• Do not touch the green IC chip attached to the ink cartridge. Also, never peel off the labels
and film attached to the ink cartridge. This could prevent you from properly setting,
operating, or printing with the ink cartridge, or ink could leak out.
• Use up the ink cartridge before the expiration date labeled on the inkcartridge.
Push in.
Pull straight out.
Do not touch
the IC chip.
Maintenance
153