Table of Contents
Advertisement
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver (1)
Tools Needed
Location of Mounting Holes
Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to the
chassis.
Phillips Screws (9)
VGA
LAN2
COM1
LE1
C
A
UID
BMC
LAN
LAN
CTRL
CTRL
LEDM1
PCH
SXB1
BIOS
LICENSE
CPU1
JF1
CPU2
BT1
21
Chapter 2: Installation
Standoffs (9)
Only if Needed
LAN1
IPMI_LAN
USB0/1(3.0)
JSD1
JTPM1
I-SATA6
JBT1
I-SATA7
JSD2
Advertisement
Table of Contents
