Dimm Installation; Dimm Removal - Supermicro X11DPT-L User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: P1-DIMMA1, P1-DIMMD1, P1-
DIMMB1, and P1-DIMME1. For the system
to work properly, please use memory
modules of the same type and speed on
the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing below.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
VGA
LE1
C A
UID
BMC
LEDM1
SXB1
BIOS
LICENSE
JF1
BT1
Release Tabs
Insert the DIMM module into the memory slot.
35
Chapter 2: Installation
COM1 LAN2 LAN1 IPMI_LAN
USB0/1(3.0)
LAN LAN
CTRL CTRL
JSD1
JTPM1
I-SATA6
JBT1
PCH
I-SATA7
JSD2
CPU1
CPU2
Notches