Supermicro X11DPT-L User Manual page 90

X11DPT-L User's Manual
TXT Support
Select Enabled to enable Intel Trusted Execution Technology (TXT) support to enhance
system security and data integrity. The options are Disabled and Enabled.
Note 1: If the option for this item (TXT Support) is set to Enabled, be sure to disable
EV DFX (Device Function On-Hide) support for the system to work properly. (EV DFX
is under "IIO Configuration" in the "Chipset/North Bridge" submenu).
Note 2: For more information on TPM, please refer to the TPM manual at http://www.
supermicro.com/manuals/other.
Intel(R) Virtual RAID on CPU

When this submenu is selected and the RAID devices are detected, the BIOS screen
displays the following items:
Intel(R) VROC with VMD Technology 5.4.0.1039
Intel(R) RSTe SATA Controller (Available when "Configure SATA

as" is set to RAID and "SATA RAID option ROM/UEFI" is set to
EFI)
Intel(R) RSTe 5.4.0.1039 SATA Driver
This feature displays RSTe Driver version.
Intel(R) Ethernet Connection X722 for 1GbE - xx:xx:xx:xx:xx:xx

(Available when "Onboard Lan option ROM" is set to EFI)
NIC Configuration
Link Speed
This feature allows the user to specify the port speed used for the selected boot protocol.
The options are Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100
Mbps Full.
Wake On LAN
Select Enabled for Wake_On_LAN support, which will allow the system to "wake up" when
an onboard device receives an incoming signal. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. Use the
keybaord to select a value.
90