Advertisement
Installation (cont.)
A
B
C
D
A
Decor Star
10. After the excess hose has been trimmed.
First slip compression nut (C) and the com-
pression ring (B) onto the PVC hose (D). In-
sert the elbow connector (A) into the hose.
Push the compression ring (B) up toward the
end of the hose as far as possible. Tighten
the compression nut (C) (NOTE: Do not over
tighten the nut as it may damage the seal and
causes leaks)
11. Wipe the surrounding surface around the
pipe free of dirt and debris. Peel off the adhe-
sive backing of the cover base (A) and press it
firmly against the wall to ensure a tight bond.
Apply some PTFE tape on the pipe threading.
Connect the main water supply hose assem-
bly to the pipe. (NOTE: Do not over tighten
the nut as it may damage the seal and causes
leaks) Once the connection is made, install
B
the cover over the elbow connector.
12. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (NOTE: Install the rubber washer to
prevent leak.)
10
PL-006-SS Rev. A3 122015
Advertisement
