Advertisement
Installation (cont.)
A
B
C
D
Decor Star
7. Hang the unit on the wall. Make sure the
unit is seated properly. Apply silicon sealant
on both sides of the shower panel to complete
the installation. (NOTE: do not seal the bottom
of the panel, this will allow any possible future
leaks to drain out the panel)
8. Disassemble the water supply hose assem-
bly by loosen the compression nut (C),remove
compression ring (B) and pull out the elbow
connetor (A)
9. Measure the length needed for the main
water supply hoses. Trim off the excess PVC
tubing.
9
PL-006-SS Rev. A3 122015
Advertisement
