Installing The Exhaust Grill; Reinstalling The Oven Doors - Dacor EORD227S Installation Instructions Manual

Installing the Exhaust Grill

With the oven secured to the cabinet, install the exhaust
grill by mounting it to the oven with the two (2) provided
screws.
Installation Instructions

Reinstalling the Oven Doors

Failure to fully rotate the hinge catches will result in a
safety hazard and may cause personal injury due to the
door falling off its hinges. Also damage to the oven and/or
improper door alignment may occur.
On double ovens, install the top door first to reduce the
chance of damaging the lower door during installation.
NOtE: to re-install the oven door on model EORS136,
see page 14.
1. Grasp the oven door on opposite sides and lift it until
the door hinges are aligned with the openings in the
oven frame.
2. Holding the door at about a 30˚ angle from the horizon-
tal, slide the hinges into the openings until the bottom
hinge arms drop fully into the hinge receptacles.
3. Lower the door to the fully opened position. Rotate both
hinge catches toward the oven. Open and close the
door slowly and completely to ensure that it is properly
installed.
WARNING
CAUtION
Insert door at
30° angle
30º
Catch
13