Playback Controls - boytone TR-18CD Operating Instructions Manual

display the total number of folders and MP3/WMA files.
4. The system will then start audio playback from the media storage device (USB or
SD card) automatically.

Playback controls

PLAY/PAUSE Press this button once to stop playing, press it again to continue.
STOP Press this button to stop audio playback, the display will then show
the total number of MP3/WMA files.
SKIP UP
Press this button once to play the next file, press and hold this button
to fast forward through the files/tracks.
SKIP DOWN Press this button once to play the previous file, press and hold this
button to fast reverse through the files/tracks.
TUNING KNOB Turn this knob to the right/left to search a folder backward or forward.
REPAT CD/USB/SD PlayBack press and hold this button to one & All repatedly
Important notes
 The system can detect and read files in MP3 / WMA format only via the USB port or SD
card slot.
 You can connect an MP3 player to the system via the USB socket, however, some MP3
players may not be able to play via the USB socket. This is due to variances in the
MP3 encoding format; it is not a malfunction of the system.
 There are numerous USB and SD device producers and their products vary in solution
and format. We therefore cannot guarantee that this unit will support all USB and SD
devices from every brand.
 This system supports SD cards up to 8GB.
 MP3 / WMA track format requirements:

MP3 bit rate: 32 kbps~256 kbps; WMA bit rate: 32 kbps ~ 320 kbps.
Programming tracks for playback
Up to 64 tracks can be programmed for MP3 / WMA file playback in any order.
Before programming, however, be sure the system is in STOP mode.
1. Set the function selector to CD/ USB/SD mode, then press the stop
12
button.