Playback Controls - boytone BT-19DJM Operating Instructions Manual

The USB Port and SD Card Slot
Playback of music in MP3/WMA format via USB device or memory card
The system is able to decode and playback all MP3/WMA files stored in the memory
media connected to the USB port or SD/MMC card slot.
1. Turn the volume knob clockwise to turn the equipment on.
2. Following the illustration below, insert a USB device face up into the USB port, making
sure it is fully inserted. Alternatively, insert a memory card in the direction of the arrow
(as shown on the label next to the memory card slot), making sure to insert it straight
without bending.
IMPORTANT: Connecting the USB device upside down or backwards could damage
the audio system or storage media (USB drive, SD or MMC card). Check
to ensure the direction is correct before connection.
3. Set the function selector to USB/SD mode. (If you have both a USB device and a
memory card inserted, press the MODE button to toggle between USB and SD mode.)
The system will start reading the storage medium automatically after mode selection
and will display the total number of folders and MP3/WMA files.
The system will then start audio playback from the media storage device (USB or
4.
SD card) automatically.

Playback controls

Press this button once to stop playing, press it again to continue.
PLAY/PAUSE
Press this button to stop audio playback, the display will then show
STOP
the total number of MP3/WMA files.
10