Related Manuals for XMark Fitness OLYMPIC XM-4421
Summary of Contents for XMark Fitness OLYMPIC XM-4421
- Page 1 XM-4421 OLYMPIC BENCH with LEG Owner’s Manual Read all precautions and instructions in this manual before using this equipment. 8/09...
-
Page 2: Table Of Contents
SAFETY PRECAUTIONS • This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. -
Page 3: Before You Begin
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our XMARK Fitness help line. We have trained service technicians on site to take care of you, our valued customer. -
Page 4: Assembly
Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 1 Connect the Right Upright (4) and Left Upright (1) with the Lower Cross Bar (13) using four M10X70 Bolts (24) and four M10 Lock Nuts (26). Connect the Right Upright (4) and Left Upright (1) with the Upper Cross Bar (2) using six M10X20 Bolts (17) and six M10 Washers(25). - Page 5 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 2 Join Dip Stand Holders (14) onto Lower Cross Bar (13) and Upper Cross Bar (2). Secure with eight M10 x 70 Bolts (24) and eight M10 Lock Nuts (26).
- Page 6 Assembly NOTE: Hand tighten bolts and locknuts until machine is fully assembled. STEP 5 Insert Front Base (9) into Bottom of Main Frame (3) with three M10 x 20 Bolts (17) and three M10 W ashers (25). STEP 6 Connect Main Frame (3) and Lower Cross Brace (13) with two M10 x 75 Bolts (24) and two M 10 Locknuts (26).Connect Adjustable Seat Br a ce(42) and Upper Cross Brace (2) with two M10 x 75...
- Page 7 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 8 Attach the Upper Back Pad (10) and Lower Back Pad (31) to the Backrest Supports (12) using eight M6 Washers (28) and eight M6X40 Bolts (27). STEP 9 Slide Seat Supports (40) and Backrest Supports (12) to the seat-rod on Seat Adjustment Carriage...
- Page 8 Assembly NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. STEP 10 Insert the Leg Lever Holder (7) into the Main Frame (3) and secure with Knob Bolt (15). Install the Leg Lift Bar (8) to bracket of Leg Lever Holder (7) using one M10X75 Bolt (24), two Spacers (34) and one M10 Lock Nut (26).
-
Page 9: Parts List
Parts List XM-4421 Parts List Key NO. Part No. Description Left Upright 204025316503 204025317503 Upper Cross Bar Main Frame 204056407503 204025323503 Right Upright Adjustment Tube 204025302503 204025320503 Weight Rest Leg Lever Holder 204056303503 204056401503 Leg Lift Bar Front Base 204056406503 307040000735 Upper Back Pad Seat Pad... -
Page 10: Exploded View
Exploded View... - Page 11 Exploded View...
-
Page 12: Warranty Information
Should any product submitted for warranty service be found ineligible, an estimate of repair cost will be furnished and the repair will be made if requested by you upon XMARK Fitness’... - Page 13 XMARK Fitness 7501 Trammel Drive Shreveport, LA 71108 Customer Service: 1-800-719-4605...