About The Html Viewer Function - Sony VPL-FHZ101L Operating Instructions Manual

6
Click on [PJ Control API] to display the PJ
Control API page.
PJ Control API button
Start PJ Control API Service: Set PJ Control
API to enabled or disabled.
-Requires Authentication: Set the
authentication for PJ Control API to enabled
or disabled.
-PSK(Pre-Shared Key): Input the PSK
(Pre-Shared Key) for authentication. Only 8
to 63 alphanumeric characters can be
input.
7
Click on [Service] to display the Service page.
The system service function is set.
Service button
Start DDDP Service: Set DDDP to enabled or
disabled. For details, refer to the DDDP
specifications from AMX Corporation.
Crestron Control: Set Crestron Control to
enabled or disabled. For details, refer to the
product catalogues, etc., from Crestron
Corporation.
-IP Address: Input the Crestron system server.
-IP ID(HEX): Input the IP ID(HEX) for the CIP
protocol.
-Port No.: Input the port number for the CIP
protocol server.
Resetting the network settings
Reset the network settings to their factory
defaults.
Reset button
Reset: Reset all Web browser settings to their
factory defaults.
.

About the HTML Viewer Function

You can set the HTML viewer (INPUT G) as the
background when no signal is input to the
projector or the projector is not operated.
Select "Input-G" in "Background" of the Function
menu when using the HTML viewer.
When no signal is detected, the input source
automatically switches to INPUT G. When an input
signal is detected, it switches from INPUT G to the
previous input signal.
Recommended format for still images
(For <img> tag)
Format
JPEG
PNG
Up to 1920×1080
BMP
GIF
The HTML viewer function is displayed by INPUT G.
Switch to INPUT G using the input key on the
Remote Commander.
43
Reset
Resolution