Sony VPL-FHZ101L Operating Instructions Manual page 12

Connecting to a computer/video device
INPUT E
Computer
Video device
Connecting to a network equipment (using an HDBaseT terminal)
The HDBaseT terminal is used when connecting the projector to a network equipment to control the
projector.
Computer
Wired connection
Tablet PC/Smartphone
Computer
Wireless connection
Notes
 When using network features, be sure to check if "LAN Setting" is set to "via HDBaseT" (page 31).
 Connect the projector directly to the HDBaseT transmitter without going through a hub or router.

Set "Extron XTP" in the Connection/Power menu to "On" when connecting to XTP Systems manufactured by Extron
Electronics (page 31).
When you monitor and control the projector via the network, access the Setup page of the projector (page 41) via a Web
browser and enable the desired control protocol.
HDMI output
terminal
HDMI cable
(not supplied)
HDMI output
terminal
LAN
terminal
Hub, wireless router
HDBaseT transmitter
LAN cable (straight type)
(not supplied)
HDBaseT transmitter
LAN cable: STP cable with CAT5e or
higher (straight type) (not supplied)
12
LAN cable: STP cable with CAT5e or
higher (straight type) (not supplied)