Enlarging A Part Of The Image (Digital Zoom Function); Projecting Images With Two Pictures Simultaneously (Two-Picture Display Function) - Sony VPL-FHZ101L Operating Instructions Manual

Enlarging a Part of the Image (Digital Zoom
Function)
Using the D ZOOM (Digital Zoom) key on the
Remote Commander, you can enlarge a part of the
image while projecting. This function is available
when a computer signal is input.
Note
The D ZOOM (Digital Zoom) key may not be
enabled depending on the resolution of the input
signal or when displaying two pictures.
1
Press the D ZOOM + key to display the digital
zoom icon on the projected image.
2
Press the /// keys to move the digital
zoom icon to the point on the image you wish
to enlarge.
3
Press the D ZOOM + key or the D ZOOM – key
repeatedly to change the enlargement ratio.
The image can be enlarged up to 4 times.
Press the RESET key to restore the previous image.
Projecting Images with Two Pictures
Simultaneously (Two-Picture Display
Function)
You can project images from two input signals on
the screen as a main picture and subpicture at the
same time. To switch between main and sub
pictures, press the TWIN key on the Remote
Commander.
One-picture display
Two-picture display
Main picture
You can select the image to project to the
main picture.
The subpicture is preset to source the signal
input from INPUT B.
TWIN key
(A) (B)
Subpicture
Combinations of input signals
Main picture
INPUT A (RGB/YP
INPUT B (RGB)
INPUT C (DVI-D)
INPUT D (HDMI)
INPUT E (HDBaseT)
INPUT F (Optional
adaptor)
Notes
 When "Screen Aspect" (page 34) is set to "4:3," the
two-picture display function is not available.
 While displaying two pictures, the input signal icon
does not appear in the input select window
(page 16).
 Picture settings set for one picture may not be
reflected as two pictures.
While displaying two pictures, the  (On) key,

 (standby) key, INPUT key, and BLANK key are
available.
22
Subpicture
P ) INPUT B (RGB)
B R
-
INPUT B (RGB)