Using The S-Link Function Without A Sony Av Receiver - Sony KP-48V80 Operating Instructions Manual

MBE Installing and Connecting the Projection TV (continued)
Using the S-Link Function
S-Link is a Sony innovation designed to
make the Sony components work together. It
allows vou to automatically switch the
projection TV's input mode to video when
you press the play button on the Sony S-Link
VCR.
Using the S-Link function without
a Sony AV receiver
1 Connect the Sony VCR (DVD). (see
"Connecting a cable TV system /antenna
to a VCR" on page 6 or "Connecting a
DVD Player with component video
output connectors" on page 12)
2 Using an S-LINK cable, connect the
S-LINK jacks on the VCR (DVD) and the
projection TV. Ensure that both ends are
seated firmly and that the projection TV's
S-LINK jack is in the same row as the
AUDIO/VIDEO cable extending from the
Sony VCR (DVD).
16
Disconnect all power sources before making any connections.
Refer also to the Operating Instructions
supplied with the VCR, satellite receiver,
DVD player, LD player and other Sony
video equipment for details.
VMC-10HG
Y Ps Pr (not supplied)
(Rear of projection TV)
Component video
outputs
Audio outputs
Sony
DVD
Sony VCR
AUDIO-R
AUDIO-L S-LINK
VIDEO RK-G34, etc. Audio/video
(not supplied) outputs S-LINK
1
Audio/video/S-LINK cable