Table of Contents
Advertisement
Rinse aid
Drying is faster if you use rinse aid. When the rinse aid
needs topping up, the above symbol lights on the display.
Top up with rinse aid
Top up with rinse aid as follows:
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid. Only add rinse aid to
the level marked max.
3. Wipe up any splashes of rinse aid around the
compartment.
4. Close the lid firmly.
NOTE!
After topping up, it may take a while before the symbol
goes out.
26
Select dosage
The rinse aid dispenser can be adjusted between 0 (off)
and 6.
Increase the rinse aid dosage:
•
If the dishes have water marks.
Reduce the rinse aid dosage:
•
If the dishes have a sticky white/blue film.
•
If the dishes are streaked.
•
Build-up of foam. If you have very soft water, the rinse
aid can be diluted 50:50 with water.
Set the dosage
The section Settings describes how to set the rinse aid
dosage.
Advertisement
Table of Contents
